How to repair a damaged headphone cable is easy for you: fácil steps
At some point you definitely had to Throw away your headphones because the cable is broken. This happens again and again, often due to wear and tear, accident or just by oportunidad. Trust us, it’s more common than many think.
Either way, it probably doesn’t have to cost plus to have buy new hearing aids and that you cánido restore them with a few fácil steps to continue enjoying them your favorite music as if nothing had happened.
If you want to know How to fix a broken headphone cable In just a few minutes, watch our step-by-step guide where we explain everything you need to do Be a master of DIY and home repair.
Learn how to repair internal headphone cables in easy steps
The first thing to consider before you start repair processthat’s all they have tools and materials necessary. In this case, you should have the following on hand:
Damaged wires cánido be restored from your hearing aids by following these fácil steps
- Knife, blade or cable cutter.
- Tin.
- soldering iron
- electrical tape or shrink tubing.
- Lighter, lighter or heat gun.
- The headphones you want to repair.
Know what the materials and tools What do you want, it’s time to get down to business and start repairing the wiring. This process is very fácil, yes, you should be careful while doing it.
The first step
Step 1: Find a wire cutter
The first step is removing the Razor, blade or wire cutters Get a cleaner cut in the broken cable, exposing its interior. Once this is done, you need to strip the wire remove outer cover and reveal the inner threads. Take advantage of it at this point Preheat soldering iron for later.
Consider stripping at least a few inches of wire so you perro connect them later. Repeat this step both ends of the wires at its breaking point.
The second stage
Step 2: Connect the broken wires from both ends
if you are Cable stripped and outer sheath removed, it’s time to connect the broken wires from both ends. Before doing this, you will need to thread one end of the wire through the heat shrink tubing and slide it far enough so that it does not cover the exposed end of the wire to be spliced.
Now take the ends of the paired wires (red to red, green to green, etcétera.) and connect the two ends together by twisting them together until a firm connection is achieved.
After that, use the soldering iron we used earlier and put a little bit of tin on the junction of each wire. By melting it helps keep the wires from separating and keeps the connection together well. Leave to cool for a few seconds.
The third step
Step 3: Cover seams and heat with a lighter
Once you’ve secured both ends of the wire, slide the heat shrink tubing up cover the seams and with the help of a cigarette lighter, lighter or heat gun apply some heat to the hose to make it contract and stick to the wire connection. This serves as protection for the connection and prevents a later failure.
If you don’t have them shrink tubingyou perro only Cover the wire connection with electrical tape and it will work just as well. It may not be as aesthetic, but it will be functional. And voila, you’ve already fixed your headphone cable.
As you cánido see, it is one a fairly easy and quick process with which you cánido Save your headphones and keep listening to your favorite music or problematic content.
Best of all, there is one pretty cheap solution and with materials they easily have at home. Share this with the person who always damages or puts on their headphones when you need them.
If you enjoyed this article, you are welcome to check out how to fix your screen like a pro with these cell phone repair kits, or also check out the easiest way to fix a phone that has been dropped in water (good). And if you’re looking for something more dangerous, check out this definitive guide on how to fix your terminal.